Wp cone valve forks manual
Workshop Manual MXMA 4800 Cone Valve This is a factory WP printed 30 page workshop manual (not just an owner’s manual) that provides the information you need to rebuild and service WP Cone forks. It is NOT perfect BUT it is the only WP Cone fork manual available anywhere…..period. Several …
Les fourches cone valves sont les fourches haut de gamme de chez WP. Grâce à son système en cône unique, la WP Cone Valve permet une qualité d’amortissement unique. Fabriquée à partir des meilleurs matériaux et revêtements la fourche WP Cone Valve est fournie avec les ressorts adaptés aux poids et à l’utilisation du pilote. La cone valve AIR est la dernière génération de la
“The new WP Suspension this year has been great, we had the first AORC round with them, and both the 48mm Cone Valve Forks and Trax Link shock felt great.” Says Sanders. “We used the same set-up for the A4DE, but the conditions were a little different, so we made a few adjustments with the clickers.
KTM WP SUSPENSION MANUALS: KTM WP 4CS Rebuild Manual; KTM WP Cone Valve Service Manual; 2007 WP Shock Absorber 690 Supermoto -50SX 2005-2007 WP Fork 690-950-990 Service Repair Manual; 2005-2012 KTM WP 4860 CC Fork Repair Manual
WP AER 48 Cone Valve Forks are tested and designed to offer the highest performance in combination with the WP TRAX shock absorbers. Considering the great range of setups that this fork allows, it can often times be used across a range of disciplines such as MX, Cross Country and Enduro. Attention: Please make sure to consult your authorized WP Supplier for the correct setup and individual
Buy WP original spare parts for WP Cone Valve fork at the WP Authorized Center extracross.com
No sealing surface so minimum drop of pressure after valves opens Unlimited opening up of WP Cone Valve so harshness reduced No shims, therefore no loss of damping because of bent shims
Ktm Wp Suspension Service Manual Read and Download PDF Manuals & Documents of wp fork service manual, from WP 4054 disassembly – posted in Suspension: I have a KTM Duke 620 -95. KTM WP SUSPENSION MANUALS: KTM WP 4CS Rebuild Manual · 4357 4860 MXMA WP KTM Fork Manual · KTM WP PDS 2003 5018 repair manual.
(1) Fitment. The WP Cone Valve forks are designed to fit right into the stock triple clamps. To mount the Super Trax shock, remove all four subframe bolts and push the subframe to the side just
WP Xact Pro / XPlor Pro Fork (new generation) – 99. WP Xact Pro / XPlor Pro SuperTrax Shock (new generation) – 49. WP Cone Valve Fork (previous generation black fork) – 99. WP TRAX shock (previous generation black and red) – 99. Pro Components to fit …
WP Cone Valve Fork Complete (Special pricing avialable for JBI supported racers, email to find out how.). The WP Motorsports Cone Valve technology permits almost limitless damping performance due to a unique valving system.
WP-TRAX Shock Absorbers are the most innovative shock absorbers on the market. The TRAX unit is a very compact system in the bottom mounting fork of the shock, which significantly improves the grip of the rear wheel. This system has been successfully implemented by the Factory Racing department and many World Championship titles prove how effective it is.
04/05/2016 · Check out this in-depth look at WP Performance’s flagship suspension components, the Cone Valve fork and Trax shock. Take a listen as the WP …
19/03/2018 · Hi everyone, What settings are you running on your cone valve spring forks, and how much do you weigh, what SAG do you run and rear spring (KTM/Husky only)?. Ive tested 400 and 420 oil with 4.8 to 5.0 springs with various preload and clickers. 89kg/196lbs, KTM 450 SXF 2017.
MXMA 48mm Cone Valve Fork With current MX and Offroad forks a lot of compression damping is required; to create better comfort suspension tuners concentrate on changing the check valve setting. Check valve settings are a compromise between “enough comfort” v’s “enough damping”. Cone Valve forks utilize a Cone Valve system in place of
Fork Bushings for 48mm WP, KTM, Husaberg, Husqvarna by SKF $ 19.90 Add to cart; Racing Fork Fluid by Maxima $ 13.95 $ 12.95 Select options; Xtrig Progressive Handlebar Dampening System (PHDS) for KTM, Husaberg, Husqvarna and Beta $ 31.45 – $ 249.95 Select options; Fork Mud Scraper for WP, Showa, KYB, Marzocchi by SKF $ 38.00 Select options
The kit allows to retrofit the WP Cone Valve compression technology at the serial production closed cartridge fork. This modification significantly improves response as well as bottom out characteristics.
17/06/2016 · As a WP Authorized Center, SDI offers Cone Valve, Trax Shocks, Sport Bike Cartridge Kits, Competition Shocks, and OEM Parts. In this video,we take a look at the details of the Cone Valve Forks
How to Set Oil Level on WP Forks video dailymotion
https://youtube.com/watch?v=7KLnarI8yuY
AOMC.mx WP AER 48 Air Fork Set 250
So I called the guys at WP Factory Services to see about getting a set of their Cone Valve Fork’s and Trax Shock. The Cone Valve fork and Trax shock is basically WP’s A-kit option for the consumer. Yes, it is expensive, but if you are in the market for close-to-factory level suspension, it is considerably less money than the Showa A-kits
WP Xplor Front Fork Piston Kit. includes complete compression and rebound assemblies with new pistons, finer adjustment control needles and a new hydraulic bottoming cup, which seals the cartridge tube to improve damping response time and bottoming control.
WP Cone Valve forks and Trax shock available. Also stock WP forks and shocks services re valved with championship winning results. Stock WP Sherco shock re valved, shortened fitted with a bladder kit and treated to our FSS service. Stock WP 4CS Forks – Treated to the Dr Shox FFS Service. Call Dr Shox on 0844 243 5352 today or you can contact us online. Contact Dr Shox. BOOTCAMP DATES. 2017
The WP Motorsports Cone Valve technology permits almost limitless damping performance due to a unique valving system. The setup of a conventional damping system has always been a compromise between sufficient comfort and bottoming reserves, whereas the Cone Valve technology now permits a combination of both factors, resulting in outstanding damping behaviour in all situations.
05/12/2009 · How to Set Oil Level on WP Forks. slaverace. 10 years ago 6.4K views. Jeff Slavens demonstrates the WP factory recommended method for filling and setting the fluid level on WP open chamber forks. This method also works on KYB and Showa open chamber forks. Report. Browse more videos. Playing next. 0:05 . FREE SHIPPING BILLET KTM REAR BRAKE PEDAL STEP TIPS 125-530 690 …
Congratulations on your purchase of the WP MX4800 Big bore cone valve for motocross, enduro, rally and motor sport. A copy of one of the best front forks in today’s cross, and where several riders have become world champion with. If you have any questions about your fork, please contact your importer. He will assist you in any way he can.
WP Cone Valve Forks replace the original forks. They are designed to fit in the original triple clamp and to be used with the original axle. The fork can also be reused for other bikes of the same type. WP Cone Valve Forks are tested and designed to offer the highest performance in combination with the WP TRAX shock absorbers. Considering the
Description . Available for WP OEM bikes with LINK system, the WP TRAX-Shock is 100% built to order at the WP factory in Austria. All specs evaluated by yourselves and your dealer are therefore taken into account, providing you with a unique product, built for you as an unique rider.
WP 4CS Forks Standard Rebuild. NOTE – GOLD VALVES REQUIRE THAT THESE FORKS BE CONVERTED TO AN OPEN-CHAMBER DESIGN AS OUTLINED IN THE STEP-BY-STEP GUIDE “FORK GOLD VALVE INSTALLATION AND OPEN CHAMBER CONVERSION”. THIS INSTRUCTION OUTLINES THE PROCEDURE FOR A STANDARD REBUILD AS DESIGNED BY WP – IT IS NOT USED FOR A GOLD VALVE INSTALLATION. WP 4CS (Four Chamber) forks …
The AER 48 Cone Valve Fork combines two of WP’s greatest technologies: The Cone Valve damping system and the AER spring system. Developed in close collaboration with current World Championship riders, the WP AER 48 Cone Valve Fork is an evolution in suspension technology delivering the highest possible performance, setups and handling.
Thank you! Your email address has been added to our newsletter distribution list. You may unsubscribe at any time.
Air leg: Unlike the production-line WP AER fork, the AER Cone Valve fork has both a main air chamber and a balance chamber (each with its own Schrader valve). This dual-air system allows more
The AER 48 Cone Valve Fork combines two of WP’s greatest technologies: The Cone Valve damping system and the AER spring system. This fork with split technology has been developed in close collaboration with current World Championship riders of many different motorcycle brands.
The Cone Valve fork and Trax shock is basically WP’s A-kit option for us average dudes out there. Yes, it is expensive, but if you are in the market for close-to-factory level suspension, it is considerably less money than the Showa A-kit sets that are for sale. The Cone Valve fork and Trax sock can be purchased at any authorized WP dealer
WP Cone Valve Fork And Trax Shock eBay
10/08/2016 · Hi Do anybody know where I can get the manual and service manual for the Wp conevalve and WP trax shock? The swedish distrubuter couldnt get them. Regards
Testing WP Cone Valve Forks & Trax Shock I was pretty excited that WP was able to come up with a set of suspension for us to test. Let’s face it, haven’t we all wondered just how good real factory suspension is? Surely I could be fast like those factory boys if I only had…
Congratulations on your purchase of the WP MX4800 Big bore cone valve for motocross, enduro, rally and motorsports. This fork is a copy of one of the best front forks in today´s offroad motorsports, with which several riders have become world champion. If you have any questions about your fork, please contact your local dealer. He will assist
WP AER 48 Air Fork Set 250 The revolutionary new and super-lightweight WP fork, a 48 mm USD air-sprung fork developed by WP Suspension in close collaboration with KTM. It is a split fork with separate functions for each fork leg. The damping functions are on the right side, whereas the air spring is in the left. The left leg features a capsuled
The Honda comes standard with KYB suspension and doesn’t have tons of comfort in stock form. We rode the stock suspension first then switched to the WP cone valve fork and Trax shock after lunch.
WP 4CS Fork Mods . 3) WP 4CS Fork Shim, mid Valve, bottoming control valving, revalving and mods. 4) 4CS WP Fork Top Cartridge refiller hole bleed. 5) Note the wear marks and galling that are common to the Red Cones and fork caps anodizing that flakes off and is poor quality. . Wp 4CS Fork Kit Rebound Cone Fork and Bottoming control open cone.
Enduro21 WP Suspension winning combination for Milner
Krooztune KTM WP AER 48 Testing and development. Krooztune KTM WP AER 48 Testing and development – With the prompt arrival of KTM’s much anticipated WP AER 48 Air Fork we decided to hit this hard and fast to find out the good, the bad, and the ugly straight, up from KTM’s latest offering.
The WP Cone Valve has a unbeatable individual progressive damping behaviour with setting options for the range of compression and rebound and WP produce the Cone Valve Fork only based on the customer’s requirements. The benefits of Cone Valve + WP Cone Valve can always open further which reduces harshness + More comfort when using harder set-ups
10/07/2017 · This is a factory WP printed 30 page workshop manual (not just an owner’s manual) that provides the information you need to rebuild and tune WP Cone forks. It is NOT perfect BUT it is the only WP Cone fork manual available anywhere…..period. Several of the pictures are corrupted. Do not order and then complain about the picture quality. NO
Gear4 – Offroad – Gear4 Motorcycles Gear4 – Offroad
25/07/2018 · Hi Has someone got a workshop/service manual for WP cone valve fork MX4800 2016? I only got a owners manual when I bought it used and there is no info on how to service it or oil levels and such. I have searched and found out that 385m…
Reviewed WP Cone Valve Fork And Trax Shock – PulpMX
A Closer Look WP Cone Valve Forks YouTube
The Cone Valve fork will set you back 50.00 (not including springs) and the Trax shock is 00.00 (not including spring). WP even offers this set of suspension for the Honda, Kawasaki, Husqvarna, KTM, and Suzuki models. So is it worth the money? I rode the stock and Cone Valve/Trax set ups at several different tracks and this is what I came
WP Suspension. In terms of Off Road Pro Component products, WP can deliver Spring Cone Valve forks and Trax shocks to an extensive list of Japanese models, as well as to KTM and Husqvarna
Putting WP’s Cone Valve forks and Trax shock absorber aftermarket suspension to the Enduro21 test. WP Cone Valve forks and Trax shock absorber probably need no introduction to many Enduro21 readers. These are the forks and shock combination fitted to many factory KTM and …
PREMIUM WP A-KIT SUSPENSION: As a WP Authorized Center, Race Tech can provide you with WP’s premium line of A-Kit suspension with a personalized setup guaranteed to exceed your highest expectations. Used by many top pros, WP’s Cone Valve Forks and Trax Shock are a factory level setup available to you from Race Tech.
Workshop Manual MXMA 4800 Cone Valve Slavens Racing
Cone Valve settings 2016-2017 (350/450)? Motorcycle
Gear4 Offroad – Gear4 Motorcycles
KTM Suspension Manuals KTM Service Repair Manuals
Reviewed WP Cone Valve Fork And Trax Shock For The 2018.5
Fork Parts & Accessories Archives Slavens Racing
WP Cone Valve Fork Complete A Kit Ride JBI
https://youtube.com/watch?v=xzn6K8qywQM
FORK WORKS 2018 WP AER CONE VALVE AIR FORKS
Forks Cone Valve – Factory Connection
Cone Valve settings 2016-2017 (350/450)? Motorcycle
So I called the guys at WP Factory Services to see about getting a set of their Cone Valve Fork’s and Trax Shock. The Cone Valve fork and Trax shock is basically WP’s A-kit option for the consumer. Yes, it is expensive, but if you are in the market for close-to-factory level suspension, it is considerably less money than the Showa A-kits
WP 4CS Fork Mods . 3) WP 4CS Fork Shim, mid Valve, bottoming control valving, revalving and mods. 4) 4CS WP Fork Top Cartridge refiller hole bleed. 5) Note the wear marks and galling that are common to the Red Cones and fork caps anodizing that flakes off and is poor quality. . Wp 4CS Fork Kit Rebound Cone Fork and Bottoming control open cone.
KTM WP SUSPENSION MANUALS: KTM WP 4CS Rebuild Manual; KTM WP Cone Valve Service Manual; 2007 WP Shock Absorber 690 Supermoto -50SX 2005-2007 WP Fork 690-950-990 Service Repair Manual; 2005-2012 KTM WP 4860 CC Fork Repair Manual
Les fourches cone valves sont les fourches haut de gamme de chez WP. Grâce à son système en cône unique, la WP Cone Valve permet une qualité d’amortissement unique. Fabriquée à partir des meilleurs matériaux et revêtements la fourche WP Cone Valve est fournie avec les ressorts adaptés aux poids et à l’utilisation du pilote. La cone valve AIR est la dernière génération de la
WP Cone Valve Fork And Trax Shock eBay
WP original spare parts for WP Cone Valve fork Extracross
Ktm Wp Suspension Service Manual Read and Download PDF Manuals & Documents of wp fork service manual, from WP 4054 disassembly – posted in Suspension: I have a KTM Duke 620 -95. KTM WP SUSPENSION MANUALS: KTM WP 4CS Rebuild Manual · 4357 4860 MXMA WP KTM Fork Manual · KTM WP PDS 2003 5018 repair manual.
(1) Fitment. The WP Cone Valve forks are designed to fit right into the stock triple clamps. To mount the Super Trax shock, remove all four subframe bolts and push the subframe to the side just
05/12/2009 · How to Set Oil Level on WP Forks. slaverace. 10 years ago 6.4K views. Jeff Slavens demonstrates the WP factory recommended method for filling and setting the fluid level on WP open chamber forks. This method also works on KYB and Showa open chamber forks. Report. Browse more videos. Playing next. 0:05 . FREE SHIPPING BILLET KTM REAR BRAKE PEDAL STEP TIPS 125-530 690 …
No sealing surface so minimum drop of pressure after valves opens Unlimited opening up of WP Cone Valve so harshness reduced No shims, therefore no loss of damping because of bent shims
WP Cone Valve Fork And Trax Shock eBay
Meca MX Suspensions WP
Congratulations on your purchase of the WP MX4800 Big bore cone valve for motocross, enduro, rally and motor sport. A copy of one of the best front forks in today’s cross, and where several riders have become world champion with. If you have any questions about your fork, please contact your importer. He will assist you in any way he can.
17/06/2016 · As a WP Authorized Center, SDI offers Cone Valve, Trax Shocks, Sport Bike Cartridge Kits, Competition Shocks, and OEM Parts. In this video,we take a look at the details of the Cone Valve Forks
WP Xplor Front Fork Piston Kit. includes complete compression and rebound assemblies with new pistons, finer adjustment control needles and a new hydraulic bottoming cup, which seals the cartridge tube to improve damping response time and bottoming control.
No sealing surface so minimum drop of pressure after valves opens Unlimited opening up of WP Cone Valve so harshness reduced No shims, therefore no loss of damping because of bent shims
The kit allows to retrofit the WP Cone Valve compression technology at the serial production closed cartridge fork. This modification significantly improves response as well as bottom out characteristics.
19/03/2018 · Hi everyone, What settings are you running on your cone valve spring forks, and how much do you weigh, what SAG do you run and rear spring (KTM/Husky only)?. Ive tested 400 and 420 oil with 4.8 to 5.0 springs with various preload and clickers. 89kg/196lbs, KTM 450 SXF 2017.
Ktm Wp Suspension Service Manual Read and Download PDF Manuals & Documents of wp fork service manual, from WP 4054 disassembly – posted in Suspension: I have a KTM Duke 620 -95. KTM WP SUSPENSION MANUALS: KTM WP 4CS Rebuild Manual · 4357 4860 MXMA WP KTM Fork Manual · KTM WP PDS 2003 5018 repair manual.
Thank you! Your email address has been added to our newsletter distribution list. You may unsubscribe at any time.
Race Tech WP Suspension Authorized Center
Meca MX Suspensions WP
Description . Available for WP OEM bikes with LINK system, the WP TRAX-Shock is 100% built to order at the WP factory in Austria. All specs evaluated by yourselves and your dealer are therefore taken into account, providing you with a unique product, built for you as an unique rider.
05/12/2009 · How to Set Oil Level on WP Forks. slaverace. 10 years ago 6.4K views. Jeff Slavens demonstrates the WP factory recommended method for filling and setting the fluid level on WP open chamber forks. This method also works on KYB and Showa open chamber forks. Report. Browse more videos. Playing next. 0:05 . FREE SHIPPING BILLET KTM REAR BRAKE PEDAL STEP TIPS 125-530 690 …
17/06/2016 · As a WP Authorized Center, SDI offers Cone Valve, Trax Shocks, Sport Bike Cartridge Kits, Competition Shocks, and OEM Parts. In this video,we take a look at the details of the Cone Valve Forks
So I called the guys at WP Factory Services to see about getting a set of their Cone Valve Fork’s and Trax Shock. The Cone Valve fork and Trax shock is basically WP’s A-kit option for the consumer. Yes, it is expensive, but if you are in the market for close-to-factory level suspension, it is considerably less money than the Showa A-kits
The WP Motorsports Cone Valve technology permits almost limitless damping performance due to a unique valving system. The setup of a conventional damping system has always been a compromise between sufficient comfort and bottoming reserves, whereas the Cone Valve technology now permits a combination of both factors, resulting in outstanding damping behaviour in all situations.
Gear4 – Offroad – Gear4 Motorcycles Gear4 – Offroad
Congratulations on your purchase of the WP MX4800 Big bore cone valve for motocross, enduro, rally and motorsports. This fork is a copy of one of the best front forks in today´s offroad motorsports, with which several riders have become world champion. If you have any questions about your fork, please contact your local dealer. He will assist
“The new WP Suspension this year has been great, we had the first AORC round with them, and both the 48mm Cone Valve Forks and Trax Link shock felt great.” Says Sanders. “We used the same set-up for the A4DE, but the conditions were a little different, so we made a few adjustments with the clickers.
WP Cone Valve Fork Complete A Kit Ride JBI
Fork Kits Motocross Suspension Direct Suspension
WP Suspension. In terms of Off Road Pro Component products, WP can deliver Spring Cone Valve forks and Trax shocks to an extensive list of Japanese models, as well as to KTM and Husqvarna
WP AER 48 Air Fork Set 250 The revolutionary new and super-lightweight WP fork, a 48 mm USD air-sprung fork developed by WP Suspension in close collaboration with KTM. It is a split fork with separate functions for each fork leg. The damping functions are on the right side, whereas the air spring is in the left. The left leg features a capsuled
PREMIUM WP A-KIT SUSPENSION: As a WP Authorized Center, Race Tech can provide you with WP’s premium line of A-Kit suspension with a personalized setup guaranteed to exceed your highest expectations. Used by many top pros, WP’s Cone Valve Forks and Trax Shock are a factory level setup available to you from Race Tech.
WP-TRAX Shock Absorbers are the most innovative shock absorbers on the market. The TRAX unit is a very compact system in the bottom mounting fork of the shock, which significantly improves the grip of the rear wheel. This system has been successfully implemented by the Factory Racing department and many World Championship titles prove how effective it is.
Thank you! Your email address has been added to our newsletter distribution list. You may unsubscribe at any time.
05/12/2009 · How to Set Oil Level on WP Forks. slaverace. 10 years ago 6.4K views. Jeff Slavens demonstrates the WP factory recommended method for filling and setting the fluid level on WP open chamber forks. This method also works on KYB and Showa open chamber forks. Report. Browse more videos. Playing next. 0:05 . FREE SHIPPING BILLET KTM REAR BRAKE PEDAL STEP TIPS 125-530 690 …
The kit allows to retrofit the WP Cone Valve compression technology at the serial production closed cartridge fork. This modification significantly improves response as well as bottom out characteristics.
The AER 48 Cone Valve Fork combines two of WP’s greatest technologies: The Cone Valve damping system and the AER spring system. This fork with split technology has been developed in close collaboration with current World Championship riders of many different motorcycle brands.
Krooztune KTM WP AER 48 Testing and development. Krooztune KTM WP AER 48 Testing and development – With the prompt arrival of KTM’s much anticipated WP AER 48 Air Fork we decided to hit this hard and fast to find out the good, the bad, and the ugly straight, up from KTM’s latest offering.
Congratulations on your purchase of the WP MX4800 Big bore cone valve for motocross, enduro, rally and motor sport. A copy of one of the best front forks in today’s cross, and where several riders have become world champion with. If you have any questions about your fork, please contact your importer. He will assist you in any way he can.
(1) Fitment. The WP Cone Valve forks are designed to fit right into the stock triple clamps. To mount the Super Trax shock, remove all four subframe bolts and push the subframe to the side just
Buy WP original spare parts for WP Cone Valve fork at the WP Authorized Center extracross.com
10/08/2016 · Hi Do anybody know where I can get the manual and service manual for the Wp conevalve and WP trax shock? The swedish distrubuter couldnt get them. Regards
25/07/2018 · Hi Has someone got a workshop/service manual for WP cone valve fork MX4800 2016? I only got a owners manual when I bought it used and there is no info on how to service it or oil levels and such. I have searched and found out that 385m…
Meca MX Suspensions WP
KTM Suspension Manuals KTM Service Repair Manuals
Thank you! Your email address has been added to our newsletter distribution list. You may unsubscribe at any time.
10/07/2017 · This is a factory WP printed 30 page workshop manual (not just an owner’s manual) that provides the information you need to rebuild and tune WP Cone forks. It is NOT perfect BUT it is the only WP Cone fork manual available anywhere…..period. Several of the pictures are corrupted. Do not order and then complain about the picture quality. NO
The Cone Valve fork will set you back 50.00 (not including springs) and the Trax shock is 00.00 (not including spring). WP even offers this set of suspension for the Honda, Kawasaki, Husqvarna, KTM, and Suzuki models. So is it worth the money? I rode the stock and Cone Valve/Trax set ups at several different tracks and this is what I came
WP Suspension. In terms of Off Road Pro Component products, WP can deliver Spring Cone Valve forks and Trax shocks to an extensive list of Japanese models, as well as to KTM and Husqvarna
WP Cone Valve Forks replace the original forks. They are designed to fit in the original triple clamp and to be used with the original axle. The fork can also be reused for other bikes of the same type. WP Cone Valve Forks are tested and designed to offer the highest performance in combination with the WP TRAX shock absorbers. Considering the
WP Cone Valve forks and Trax shock available. Also stock WP forks and shocks services re valved with championship winning results. Stock WP Sherco shock re valved, shortened fitted with a bladder kit and treated to our FSS service. Stock WP 4CS Forks – Treated to the Dr Shox FFS Service. Call Dr Shox on 0844 243 5352 today or you can contact us online. Contact Dr Shox. BOOTCAMP DATES. 2017
PREMIUM WP A-KIT SUSPENSION: As a WP Authorized Center, Race Tech can provide you with WP’s premium line of A-Kit suspension with a personalized setup guaranteed to exceed your highest expectations. Used by many top pros, WP’s Cone Valve Forks and Trax Shock are a factory level setup available to you from Race Tech.